Training Facility Norms and Standard Equipment Lists. Fook Yen Chong

      

      Training Facility Norms and Standard Equipment Lists

      VOLUME 2

      MECHATRONICS TECHNOLOGY

      Fook Yen Chong and Raymond Tay

      NOVEMBER 2019

       Creative Commons Attribution 3.0 IGO license (CC BY 3.0 IGO)

      © 2019 Asian Development Bank

      6 ADB Avenue, Mandaluyong City, 1550 Metro Manila, Philippines

      Tel [phone]; Fax [phone]

       www.adb.org

      Some rights reserved. Published in 2019.

      ISBN 978-92-9261-828-5 (print), 978-92-9261-829-2 (electronic)

      Publication Stock No. TCS190491-2

      DOI: http://dx.doi.org/10.22617/TCS190491-2

      The views expressed in this publication are those of the authors and do not necessarily reflect the views and policies of the Asian Development Bank (ADB) or its Board of Governors or the governments they represent.

      ADB does not guarantee the accuracy of the data included in this publication and accepts no responsibility for any consequence of their use. The mention of specific companies or products of manufacturers does not imply that they are endorsed or recommended by ADB in preference to others of a similar nature that are not mentioned.

      By making any designation of or reference to a particular territory or geographic area, or by using the term “country” in this document, ADB does not intend to make any judgments as to the legal or other status of any territory or area. This work is available under the Creative Commons Attribution 3.0 IGO license (CC BY 3.0 IGO) https://creativecommons.org/licenses/by/3.0/igo/. By using the content of this publication, you agree to be bound by the terms of this license. For attribution, translations, adaptations, and permissions, please read the provisions and terms of use at https://www.adb.org/terms-use#openaccess.

      This CC license does not apply to non-ADB copyright materials in this publication. If the material is attributed to another source, please contact the copyright owner or publisher of that source for permission to reproduce it. ADB cannot be held liable for any claims that arise as a result of your use of the material.

      Please contact [email protected] if you have questions or comments with respect to content, or if you wish to obtain copyright permission for your intended use that does not fall within these terms, or for permission to use the ADB logo.

      Corrigenda to ADB publications may be found at http://www.adb.org/publications/corrigenda.

      Note:

      In this publication, “$” refers to United States dollars.

      Photos by Nanyang Polytechnic International and ITE Education Services in Singapore.

      Cover design by Joe Mark Ganaban.

      ACKNOWLEDGMENTS

      The Asian Development Bank (ADB) has ramped up lending to the technical and vocational education and training (TVET) sector in recent years. TVET institutions are instrumental in strengthening skills and entrepreneurial capabilities of young people. Improving access, quality, equity, and relevance of TVET is therefore critical to meeting the aspirations of the youth and industry needs. Education and skills development are often unable to keep up with the pace of technological changes, and TVET systems need to adopt new technologies much faster under the fourth industrial revolution. Recent technological developments in the area of artificial intelligence, the Internet of Things, big data analytics, and machine learning have huge implications for TVET. Constant updating of TVET facilities, instructor competencies, and the training system needs to be accelerated.

      This ADB technical specification reference guide aims to provide guidance to TVET policymakers and practitioners in the adoption of good practices for the design of training facility norms and standard equipment lists based on industry standards. These specifications are indicative, and should be further contextualized based on the actual needs of the TVET institutions. This volume is the second in a series of technical specification reference guides that cover four strategic trades in the field of manufacturing: (i) precision engineering or machining, (ii) mechatronics technology, (iii) mechanical technology, and (iv) electrical technology.

      Precision machining uses cutting tools to produce parts and components widely used in automotive parts and component manufacturing, aerospace parts frames, components manufacturing, and die or mold making. Mechatronics technology combines mechanical, electronics, computer, and electrical technology to support automation in manufacturing processes. Mechanical technology is the application of engineering and scientific principles to ensure the smooth operation and efficient use of machinery and mechanical equipment. Electrical technology is the application of science and engineering principles to install, operate, maintain, and repair electrical instruments and wiring in residential, commercial, and industrial settings.

      Fook Yen Chong, Social Sector Specialist, Human and Social Development Division (SAHS), South Asia Department, ADB, and Raymond Tay, ADB consultant in Singapore, prepared this volume. The peer reviewers were Shamit Chakravarti, Principal Social Sector Specialist, Human and Social Development Division, Southeast Asia Department; and Francis Arcenal, TVET Consultant in the Philippines. Ryotaro Hayashi, SAHS provided valuable comments, Alfredo P. Garcia and Ma. Cristina S. Bardos, SAHS provided administrative assistance. The authors are also grateful for the cooperation of Nanyang Polytechnic International and ITE Education Services in Singapore for taking photos of their training facilities at their campus.

       Sungsup Ra

      Director, Human and Social Development Division

      South Asia Department, ADB