Docter Quentin

CompTIA A+ Practice Tests


Скачать книгу

FE80::/10

      D. FF00::/8

      211 Identify the connectors shown here, from left to right.

Photograph shows two different sizes of connectors, which are square shaped and made up of transparent fiber material with its pin points surrounded by metal around it inside.

      A. ST and SC

      B. SC and ST

      C. RJ-45 and RJ-11

      D. RJ-11 and RJ-45

      212 You need to configure a wireless router for an office network. The office manager wants new devices to be able to automatically join the network and announce their presence to other networked devices. Which service should you enable to allow this?

      A. DHCP

      B. NAT

      C. QoS

      D. UPnP

      213 You are troubleshooting a computer with an IPv6 address that is in the FE80::/10 range. Which of the following statements are true? (Choose two.)

      A. The computer will not be able to get on the Internet.

      B. The computer will be able to get on the Internet.

      C. The computer is configured with a link local unicast address.

      D. The computer is configured with a global unicast address.

      214 Identify the connector shown here.

Photograph shows cord with cable at one end and other end has pin point made of metal that is flat and square shaped that is anchored by round fiber material which connects to a cable behind it.

      A. ST

      B. SC

      C. LC

      D. MFF

      215 You have set up your web server to function as an FTP server as well. Users on the Internet complain that they are not able to access the server using FTP clients. What port number are they trying to access the server on?

      A. 21

      B. 22

      C. 23

      D. 25

      E. 80

      216 Which TCP/IP protocol allows you to access data such as employee phone numbers and email addresses that are stored within an information directory?

      A. SNMP

      B. SMTP

      C. CIFS

      D. LDAP

      217 You are configuring network hosts with static IP addresses. You have chosen to use a class B network address. What is the default subnet mask that you should configure on the hosts?

      A. 255.0.0.0

      B. 255.255.0.0

      C. 255.255.255.0

      D. 255.255.255.255

      218 You are installing a new network and working in a wiring closet. You need to attach several network cables to a 110 block. Which tool should you use to perform this task?

      A. Crimper

      B. Cable stripper

      C. Cable tester

      D. Punchdown tool

      219 Which of the following Internet connection types offers the fastest download speeds?

      A. Cable

      B. DSL

      C. Fiber-optic

      D. ISDN

      220 You need to create several UTP cables from a roll of bulk cable. Your company uses the T568B standard. What is the correct order for wires in the connectors?

      A. White/orange, orange, white/green, blue, white/blue, green, white/brown, brown

      B. White/orange, orange, white/green, green, white/blue, blue, white/brown, brown

      C. White/orange, green, white/green, blue, white/blue, orange, white/brown, brown

      D. Orange, white/orange, white/green, blue, white/blue, green, white/brown, brown

      221 You are installing network cable that will support digital cable television signals. What type of cable should you install?

      A. RG-6

      B. RG-8

      C. RG-58 A/U

      D. RG-59

      222 Which TCP/IP protocol uses TCP ports 137–139 and 445 by default?

      A. FTP

      B. SSH

      C. SMB

      D. SNMP

      223 For IPv6, which of the following statements are not true? (Choose two.)

      A. Each IPv6 interface can have only one address.

      B. Each IPv6 interface is required to have a link local address.

      C. IPv6 addresses are incompatible with IPv4 networks.

      D. IPv6 no longer uses broadcasts.

      224 Which of the following network architecture devices operate at Layer 1 of the OSI model? (Choose two.)

      A. Switch

      B. Hub

      C. Extender

      D. Router

      225 You need to replace a faulty 250-foot section of RG-6 cable, but all you have available is RG-59. Which of the following statements is true?

      A. The replacement cable will not work because the distance exceeds RG-59 specifications.

      B. The replacement cable will not work because RG-6 and RG-59 use different connectors.

      C. The replacement cable will not work because RG-6 and RG-59 have different impedance.

      D. The replacement cable should work.

      226 You have been asked to design a new network that requires 10Gbps transmission speeds. Which cable types will meet the minimum specifications? (Choose two.)

      A. MMF

      B. CAT5

      C. CAT5e

      D. CAT7

      227 Which TCP/IP protocol was developed by Apple and used to transfer files between computers?

      A. FTP

      B. AFP

      C. ATP

      D. SMB

      228 Which of the following IPv6 addresses is equivalent to 127.0.0.1 in IPv4?

      A. ::0

      B. ::1

      C. ::127

      D. 2000::/3