now spent the time, when not engaged in packing my pannier bags (we were leaving the next day), in bashing her saddle with a lump of wood, and rubbing it with Brooks Proofhide and something called Neatsfoot Oil in order to take some of the sting out of it for Wanda’s inaugural Irish ride, which I was planning with my customary inefficiency.
There lay the green shore of Ireland, like some coast of plenty. We could see towns, towers, churches, harvests; but the curse of eight hundred years we could not discern.
RALPH WALDO EMERSON. English Traits, 1856
Ireland is not Paradise.
JONATHAN SWIFT, in a letter to Alexander Pope,
30 August 1716
I spent our last evening in England in the basement bedroom of our daughter and son-in-law’s house up on the highest heights of Bristol, where those who are chronic worriers wear oxygen masks, making final adjustments to the Crossfell and the Wild Cat.
There were no other contenders for this utterly boring task. Somewhere upstairs, above ground, my eleven-year-old grandson, using his father’s computer, was extracting information in a matter of seconds from what appeared to be thin air. Elsewhere in the building my granddaughter was dancing the sort of dances that little girls of six habitually execute, dreaming of being Flossie Footlights or Fonteyn. In the kitchen my daughter was about to start roasting a duck, happy, one hoped, at the thought of going back to work in the outside world from which bringing up her children had largely excluded her. Half a mile up the road, immured somewhere in a wing of the University, her husband, a mathematician turned biologist, was locked in what looked like becoming a lifelong struggle to extract the secret of what makes eyes and ears function.
And somewhere in the house was Wanda. She was about as interested in the finer points of her Wild Cat as I imagine Queen Boadicea would have been in the alignment of scythes on the axles of her chariot wheels. Both assumed, rightly, that some member of the lumpenproletariat would be keeping their equipment up to scratch. For Shimano Deore XT hubs, Biopace computer-designed drive system chainwheels, 600 EX headsets with O ring seals, and such – all items I had been forced to take an interest in, simply to know what to try and do if they went wrong – she cared not a hoot.
One of the best reasons for owning an ordinary bicycle with no expensive trimmings is that everything about it, apart from mending punctures, which is a bore whatever sort of bike you have, is comparatively simple. With expensive, thoroughbred bicycles it is another matter altogether.
If I had ever forgotten this I re-discovered it when I tried to fit Wanda’s final selection, the Brooks B72 leather saddle, the one ‘for those wanting a broader support’, to a highly sophisticated, space age Sr Laprade XL forged alloy fluted seatpin with micro-adjustment and a replacement value of around £20. A lot of money, you may say. But worth every penny of it since, according to those who know, anything nameless in the field of seatpins may snap off with rough off-the-road usage, leaving the rider either impaled on what is left of it or, at the very least, pedalling away without any visible means of support, rather like a fakir using a bicycle to perform a variation of the Indian rope trick. I had asked Overbury’s for a seatpin which gave the maximum amount of adjustment and this was it.
By now it was seven o’clock. ‘It won’t take long,’ I said, talking to myself in the absence of an audience.
The saddle was mounted on a frame which consisted of two sets of parallel wire tracks and each of these tracks had to be attached to the Laprade pin by means of a clamp with two parallel grooves on it. The principal difficulty I experienced in performing this ostensibly easy task was that the track wires were not only too far apart to fit into the grooves but were extraordinarily resistant to being drawn together. However I finally succeeded in doing this making use of a form of Spanish windlass made with a lace from a climbing boot and a skewer.
I was so pleased with myself at having accomplished this feat that I failed to notice that when I inserted the tracks into the grooves I did so with the saddle the wrong way up.
This was the moment when my daughter, fearing for her dinner and my sanity, set off in the rain and darkness to enlist the help of Charlie Quinn, who lived a few doors away. Apparently Charlie Quinn was a schoolboy who was completely dotty about bikes and when not engaged in doing his homework spent most of his spare time either riding them or working on them in a part-time capacity at Clifton Cycles, a rival bike shop to Overbury’s.
Charlie arrived with a comprehensive tool kit which included a pair of clamps, with the help of which he drew the wire tracks together with shameful ease, and inserted them in the grooves. It was therefore not without a certain despicable satisfaction that I noted that when he tightened the bolt the tracks were still loose in the grooves and the saddle wobbled.
By this time I would have been in despair, but not Charlie. ‘That’s all right,’ he said, ‘I’ll get some scrim. That’ll hold it.’ It did indeed hold it. By now the duck was nearly ready.
‘Is there anything else?’ he asked.
‘Well, if you wouldn’t mind terribly I’ve got to fit some pannier adaptor plates. It’s quite a simple job. But what about your dinner?’
‘I’ve already eaten it,’ he said. ‘I call it supper.’
All those bored by the horrendous complexities of bicycle mechanics should skip the rest of this section and resurface on page 30. For those who are not, I should explain that pannier adaptor plates are flat pieces of alloy with holes cut in them and drilled to take a single nut and bolt. These plates had to be fitted because the hooks on the elastic cords supplied with the Karrimor rear panniers to keep them in place were not a proper fit on the American-designed Blackburn alloy carriers. Although they will work at a pinch the hooks cannot be guaranteed to remain hooked on, especially when the bicycle is being used on rough ground.
It was soon obvious that we were in trouble. In order to fit the plates, the bolts used to attach them to the carriers had to be inserted through the brazed-on carrier eyes at the lower end of the chain stays, and then through eyes in the triangulated struts at the bottom of the carriers. The devilish thing was that it was not possible to insert one of these bolts from the outside in, and secure it with a nut on the inside of the carrier eye, because any nut on the inside would become enmeshed with the teeth of the outermost low-gear sprocket on the freewheel block.
This meant that both rear wheels had to be taken out so that the bolts could be inserted from the inside. At the same time the rear axles had to be packed with sufficient washers between the cone locking nuts on the hub axles and the wheel drop-outs to spread the chain stays sufficiently to give the necessary clearance to keep the bolt heads out of range of the teeth of the outermost sprocket.
But this was not the end of it. The addition of these washers had the effect of throwing the rear derailleur shift mechanism out of its pre-set alignment and this in turn affected the alignment of the front derailleur which shifted the chain on the triple chainwheels. And it was not only the shift mechanisms that went on the bum. The springing of the seat stays with the washers on the axles caused subtle alterations to the settings of the Aztec brake blocks fitted to the XT cantilever brakes operating on the rear rims and also to the amount of travel on the brake levers.
Almost literally enmeshed in all this Charlie was in his element, rushing backwards and forwards between our house and his in pouring rain, for nuts, bolts, washers, more tools and so forth. Meanwhile, I wondered if it would be all right to desert him and go off and eat the duck. When I did, feeling a pig for doing so, I don’t think he even noticed I’d gone.
It was not until we got back to England that I discovered that there had not been any need to fit these plates at all, as Blackburn marketed special shock cords to attach Karrimor panniers to Blackburn carriers.