by Amasa K. Ostrander, since deceased, the founder and for a number of years the editor of the North-Western Miller, a trade newspaper. The new ideas were for a time vigorously combated by the millers, but their worth was so plain that they were soon adopted, not only in Minneapolis, but by progressive millers throughout the country. The truth was the 'new process' in its entirety, which may be summarized in four steps–first, grinding or, more properly, granulating the berry; second, bolting or separating the 'chop' or meal into first flour, middlings, and bran; third, purifying the middlings, fourth, regrinding and rebolting the middlings to produce the higher grade, or 'patent' flour. This higher grade flour drove the best winter wheat flours out of the Eastern markets, and placed milling in Minnesota upon a firm basis. The development of the 'new process' cannot be claimed by any one man. Hundreds of millers all over the country have contributed to its advance, but the millers of Minneapolis have always taken the lead.
"Within the past two or three years what may be distinctively called the 'new process' has, in the mills of Minneapolis and some few other leading mills in the country, been giving place to a new system, or rather, a refinement of the processes above described. This latest system is known to the trade as the 'gradual reduction' or high-grinding system, as the 'new process' is the medium high-grinding system, and the old way is the low or close grinding system. In using the gradual reduction in making flour the millstones are abandoned, except for finishing some of the inferior grades of flour, and the work is done by means of grooved and plain rollers, made of chilled iron or porcelain. In some cases disks of chilled iron, suitably furrowed, are used, and in others concave mills, consisting of a cylinder running against a concave plate. In Minneapolis the chilled iron rolls take the precedence of all other means.
"The system of gradual reduction is much more complicated than either of those which preceded it; but the results obtained are a marked advance over the 'new process.' The percentage of high-grade flour is increased, several grades of different degrees of excellence being produced, and the yield is also greater from a given quantity of wheat. The system consists in reducing the wheat to flour, not at one operation, as in the old system, nor in two grindings, as in the 'new process,' but in several successive reductions, four, five, or six, as the case may be. The wheat is first passed through a pair of corrugated chilled iron rollers, which merely split it open along the crease of the berry, liberating the dirt which lies in the crease so that it can be removed by bolting. A very small percentage of low-grade flour is also made in this reduction. After passing through what is technically called a 'scalping reel' to remove the dirt and flour, the broken wheat is passed through a second set of corrugated rollers, by which it is further broken up, and then passes through a second separating reel, which removes the flour and middlings. This operation is repeated successively until the flour portion of the berry is entirely removed from the bran, the necessary separation being made after each reduction. The middlings from the several reductions are passed through the purifiers, and, after being purified, are reduced to flour by successive reductions on smooth iron or porcelain rollers. In some cases, as stated above, iron disks and concave mills are substituted for the roller mill, but the operation is substantially the same. One of the principal objects sought to be attained by this high-grinding system is to avoid all abrasion of the bran, another is to take out the dirt in the crease of the berry at the beginning of the process, and still another to thoroughly free the bran from flour, so as to obtain as large a yield as possible. Incidental to the improved methods of milling, as now practiced in this country, is a marked improvement in the cleaning of the grain and preparing it for flouring. The earliest grain-cleaning machine was the 'smutter,' the office of which was to break the smut balls, and scour the outside of the bran to remove any adhering dust, the scouring machine being too harsh in its action, breaking the kernels of wheat, and so scratching and weakening the bran that it broke up readily in the grinding. The scouring process was therefore lessened, and was followed by brush machines, which brushed the dirt, loosened up and left by the scourer, from the berry. Other machines for removing the fuzzy and germ ends of the berry have also been introduced, and everything possible is done to free the grain from extraneous impurities before the process of reduction is commenced. In all the minor details of the mill there has been the same marked change, until the modern merchant mill of to-day no more resembles that of twenty-five years ago than does the modern cotton mill the old-fashioned distaff. The change has extended into the winter wheat sections, and no mill in the United States can hope to hold its place in the markets unless it is provided with the many improvements in machinery and processes which have resulted from the experiments begun in this city only ten years since, and which have made the name of Minneapolis and the products of her many mills famous throughout the world. The relative merits of the flour made by the new process and the old have been warmly discussed, but the general verdict of the great body of consumers is that the patent or new process flour is better in every way for bread making purposes, being clearer, whiter, more evenly granulated, and possessing more strength. Careful chemical analysis has confirmed this. As between winter and spring wheat flours made by the new process and gradual reduction systems, it maybe remarked that the former contain more starch and are whiter in color, while the latter, having more gluten, excel in strength. In milling all varieties of wheat, whether winter or spring, the new processes are in every way superior to the old, and, in aiding their inception and development, the millers of Minneapolis have conferred a lasting benefit on the country.
"Minneapolis, Minn., December 1, 1880."
THE MILLING STRUCTURES AND MACHINERY
Mr. Johnson added the following, showing the present status of the milling industry in Minneapolis:
"The description of the process of the manufacture of flour so well given above, conveys no idea of the extent and magnitude of the milling structures, machinery, and buildings employed in the business. Many of the leading millers and millwrights have personally visited and studied the best mills in England, France, Hungary, and Germany, and are as familiar with their theory, methods, and construction as of their own, and no expense or labor has been spared in introducing the most approved features of the improvements in the foreign mills. Experimenting is constantly going on, and the path behind the successful millers is strewn with the wrecks of failures. A very large proportion of the machinery is imported, though the American machinists are fast outstripping their European rivals in the quality and efficiency of the machinery needed for the new mills constantly going up.
"There are twenty-eight of these mills now constructed and at work, operating an equivalent of 412 runs of stone, consuming over sixteen million bushels of wheat, and manufacturing over three million barrels of flour annually. Their capacities range from 250 to 1,500 barrels of flour per day. Great as these capacities are, there is now one in process of construction, the Pillsbury A Mill, which at the beginning of the harvest of 1881 will have a capacity of 4,000 barrels daily. The Washburn A Mill, whose capacity is now 1,500 barrels, is being enlarged to make 8,500 barrels a day, and the Crown Roller Mill, owned by Christian Bros. & Co., is also being enlarged to produce 3,000 barrels a day. The largest mill in Europe has a daily capacity of but 2,800 barrels, and no European mill is fitted with the exquisite perfection of machinery and apparatus to be found in the mills of this city.
"The buildings are mainly built of blue limestone, found so abundant in the quarries of this city, range and line work, and rest on the solid ledge. The earlier built mills are severely plain, but the newer ones are greatly improved by the taste of the architect, and are imposing and beautiful in appearance."
DIRECT FOREIGN TRADE
The flour of Minneapolis, holding so high a rank in the markets of the world, is always in active demand, especially the best grades, and brings from $1.00 to $1.60 per barrel more than flour of the best qualities of southern, eastern, or foreign wheat. During the year nearly a million barrels were shipped direct to European and other foreign ports, on through bills of lading, and drawn for by banks here having special foreign exchange arrangements, at sight, on the day of shipment. This trade is constantly increasing, and the amount of flour handled by eastern commission men is decreasing in proportion.
Referring to the foregoing, the following letter from Mr. Geo. T. Smith to the editor of the London Miller is of interest:
SIR: I find published in the North-western Miller of December 24, 1880, extracts from an article