Patrick Sweeney

Gunsmithing: Shotguns


Скачать книгу

increased the usefulness of rifles, and insured that rifles would replace shotguns (or “smoothbores” as many prefer) in many applications, improving firearms technology also improved shotguns. In order for rifles to work, the rifling must uniformly engage the bullet the length of the barrel. A rifle barrel must be reamed and polished smooth, straight and even before it can be rifled, or the result will be an inaccurate barrel. The same methods applied to a shotgun barrel produce a more-uniform barrel that delivers consistent groups.

Gunsmithing-Shotguns_c001_f001

      This is a shotgun. Albeit a large shotgun, but a smoothbore none the less. Even when bronze gun tubes had been perfected, being on an artillery crew was dangerous. Early weapons using early gunpowder were not always safe.

      The first transition was easy: Going from wooden to metal barrels. Not only did this change the early “bombards” from unwieldy, stationary artillery pieces to marginally mobile ones, metal tubes led to hand-held individual firearms. Well, marginally hand-held, using a monopod with a fork at the top to hold the musket in place. But the race was on.

      The powder changes were quick in coming. Early powder was a mixture of the three components, and would settle out during shipping. The gunners would have to re-mix the powder when they got to the battle. “Corned” powder was powder that had been wetted, mixed, dried and re-ground. As you can imagine, grinding black powder into the right consistency is a hazardous profession, but the result was a product that didn't change with storage or shipping, and was much safer and uniform to use.

Gunsmithing-Shotguns_c001_f002

      In the production of gunpowder, quality matters. This is a test gun. A measured charge will propel the spring-marker a known distance if the powder is correctly made.

      As late as the Crimean War (1851, The Black Sea, Britain vs. Russia, and the famous poem “Charge of the Light Brigade”) armies still used smoothbore muskets as the general-issue weapon. It was not until a French ordnance officer by the name of Minié developed a hollow-base bullet that expanded on firing that development diverged. Before that brainstorm, the development of firearms was the development of smoothbores, i.e. shotguns. The British Empire was secured, held and lasted long enough to start crumbling during the time of a single model firearm. The “Brown Bess” was a smoothbore flintlock musket whose design was finalized in 1710. The heart of the Brown Bess was the perfected flintlock, a significant advance over competitive systems. The earliest individual smoothbores used the matchlock system. Developed in 1460 in Germany, the matchlock was simple: a pivoted serpentine lever held a clamp at the chamber end. The shooter carried a length of cord that had been soaked in a flammable mixture and then dried. Once ignited, it burned slowly. To fire the loaded smoothbore the shooter would insert one end of the cord (both ends were kept burning, just in case) in the clamp, puffed on it to get it hot, opened the touch-hole cover, and then pointed the “firelock” at the enemy and squeezed the back end of the serpentine. After the matchlock, came the wheellock, snaphaunce and miquelet. The wheellock is the same kind of mechanism as a cigarette lighter. Expensive, fragile and needing a lever to wind it just prior to shooting, the wheellock was not an ideal military weapon. The snaphaunce and miquelet were clumsy precursors to the flintlock, requiring extra parts and fitting.

Gunsmithing-Shotguns_c001_f003

      Early firearms were the weapons and toys of the wealthy. Not only is this snaphaunce elaborately decorated, it is a double-shot single barrel. It was expensive and high-tech for its time.

      Despite all the effort that went into developing firearms, the archer was a dominant force on some time. The greatly outnumbered British under Henry V defeated the French at Agincourt in 1415 with accurate longbow shooting. The French knights couldn't advance uphill through the mud faster than the British archers could shoot them down. (One can hardly avoid comparisons 500 years later.) The archer was considered so valuable to national defense that a hundred years later Henry VIII attempted to ban bowling and other sports because they “diverted English men from archery practice.” In rapid fire a skilled archer could launch 10 arrows a minute and place every one of them into a man-sized group more than 100 yards away. At close range an English cloth-yard shaft would go through all but the most heavy and expensive armor. At the same time a matchlock might be fired twice a minute, and guarantee hits only inside 40 yards.

Gunsmithing-Shotguns_c001_f004

      The wheel-lock operates like a spring-driven cigarette lighter. This one is elaborate, expensive, and again, highly decorated.

      The Brown Bess could be loaded prior to a battle, and depended upon to fire when needed. It could be quickly (compared to the other style locks) reloaded, and was durable enough to stand up to hard service. With changes in length, and converted to percussion, the same musket was still in use during the Crimean War. Now, 140 years is a long time for any design to hold on, especially a military one. The record may never be broken. After all, do you seriously expect the U.S. armed services to still be issuing M-16s in the year 2105? Even highly-modified ones? (However, I fully expect 1911 pistols to still be in common use, assuming we can still own them, in the year 2051.) Despite the advances in equipment by 1776, Benjamin Franklin still suggested arming revolutionaries with longbows. The drawback was training time. It takes years to train an archer to effectiveness. Granted, a musket was less effective, but the training period was a few weeks.

Gunsmithing-Shotguns_c001_f005

      Until machine production in the 19th century, all firearms parts were made by hand. This early flintlock was made with hand forges and files.

      When the musket was used as a military arm, the design had to conform to military needs. The musket was first a “firelock” but primarily a bayonet platform. After the volley, the troops would close the gap with the enemy and fight with bayonets. What they really needed at that point as an instructor was a senior NCO from the Roman Legions, because once the volley was gone, warfare tumbled back 2,000 years. During the Revolutionary War, colonial militias could inflict casualties on the British regulars with accurate rifle and musket fire, but could not keep those regulars from going anywhere they wanted. Even when they loaded their muskets with “buck and ball” (buckshot and a large lead ball) they couldn't keep the British from advancing by gunfire alone.

Gunsmithing-Shotguns_c001_f006

      This wheel-lock is more than 400 years old, and could be loaded and shot today. Quality costs, but it also lasts.

      The colonists found their Roman NCO in General Von Steuben, who drilled the tiny army in the tactics and discipline of the day. The next spring, when the newly-trained revolutionary army marched out to meet the British, the commanding officer of the British was heard to remark “Those are regulars, by God.”

      The rifled musket changed that. With the speed of fire of the musket, and the accuracy of a rifle, units could no longer maneuver in the open, and close the distance for a bayonet charge with impunity. Unfortunately, it took several more wars for the knowledge to become common. Companies and battalions that tried to do so in the Civil War found themselves taking horrendous casualties before they could close the distance. Military needs and desires went to the rifle, and left the shotgun for a while. Freed from the need to be a bayonet lever, shotguns began to get lighter, more responsive and better suited to hunting. The ethos of taking game only on the move, birds in flight and small game while running, took hold. The British in the next half-century turned the shotgun into an extension of the shooters arm. Well, the extension of a shooter who could afford to have a shotgun tailored to him as if it were merely one more accessory to his clothing.

Gunsmithing-Shotguns_c001_f007

      The