Peter Economy

Building Your Custom Home For Dummies


Скачать книгу

1 to see if you’re truly up to the task.

      There is no set time to engage your contractor as long as it’s a minimum of 60 days before you start construction so they have time to get everything ready for the build. Many people opt to engage a contractor much earlier in the process so that the contractor is actively involved during the design process.

      After you and your contractor establish a contract and you’re on your way, the two of you need to work as a team to build your custom home. In this section, we look at the contractor selection process. (You can find more information on managing your contractor relationship in Chapter 7.)

      Understanding the contractor’s role

      In most cases, the contractor doesn’t handle the hammer-and-nails part of your custom-home project. Although some contractors may participate in parts of the actual construction, their primary job is to manage the workflow and project materials and make sure everything is happening in a timely and workmanlike manner. Here are the contractor’s major responsibilities:

       Obtaining the final permits

       Managing the production schedule

       Sourcing and buying the materials

       Hiring and managing the subcontractors (or subs)

       Keeping the site safe and clean

       Managing the inspections

       Managing the budget

       Keeping you informed

       Performing quality control

       Solving any problems that arise

Not every contractor will handle all these items. When you hire your contractor, ask them how much you’ll handle directly and what the contractor will handle. If possible, the contractor’s specific scope of work should be spelled out in your contract with them. Good communication is the key to making sure you don’t waste any time or effort doubling up on tasks.

      Getting bids: Comparing apples to apples

      If you didn’t start the custom-home process with a contractor in mind, you’ll probably give your plans and specifications (or specs) to a few different contractors to get an estimate. This process is called putting your plans out to bid.

      Finding contractors to bid on your project is as easy as asking friends and your architect for referrals. If they don’t have any suggestions, you can do a Google search or drive through the neighborhood and look for construction signs on houses being built. If the building market is busy, you may have to work a little harder to find contractors who can bid in your time frame. You want at least three contractors to bid on your project, if possible. The goal is to be able to compare the bids to each other.

      The best way to compare the bids is by making sure your plans are as complete as possible. In Chapter 5, we discuss doing all your design work and material selection before the bid process. This extra work can delay your project early on but is crucial for comparing truly accurate bids. For example, you want to compare prices on the same kitchen sink model numbers to see which contractor is charging a higher profit margin. Also, make sure the contractor has included their fees in their estimate. The contractor may or may not break out their margin as a separate line item, but you need to know there won’t be any surprise additions to the costs down the line.

      

Many contractors substitute an allowance for unspecified materials. So, for example, if you haven’t picked your bathroom fixtures, one contractor may offer you a $10,000 allowance. This amount may seem cheaper than a different contractor’s $15,000 estimate, but you have no way of knowing if the quality is comparable or who is taking a higher margin. Also, availability and the difficulty of installing certain materials can impact the time and, subsequently, the cost of the project. The best way to make sure that all bids are assuming the same materials and labor necessary is to specify all the materials required for the project before you put the plans and specs out to bid. Having all these decisions clearly made in the beginning helps to avoid ugly misunderstandings and surprises later in the project. (Turn to Chapter 5 for more information on allowances and their perils.)

      Evaluating a contractor’s three Cs: Cost, craftsmanship, and compatibility

      

Do you want a quick and easy guide to help you pick the right contractor? (Yes, of course you do, because you’re reading a For Dummies book!) One way to make the choice is by examining the three Cs: cost, craftsmanship, and compatibility.

       Cost: This one is obvious, and although it’s important, it probably weighs the least in your decision-making process. The cost comparison becomes plain when the contractors return the bids. If you’ve handed them complete, detailed plans and specs, you get a clear picture of who’s working on the lowest margin or who has access to the least expensive labor and materials.

       Craftsmanship: This part is important in the long term. You want to know that the house is built well and will offer you decades of enjoyable living. Don’t confuse style and design with craftsmanship. A house can have a horrible floor plan with fantastic artisan work, or vice versa.What’s the best way to check on work quality? Look at other houses that the contractor built. Ask the contractor for a complete address list of homes they’ve built, in addition to a list of references. Make sure you look at houses built ten years ago, as well as newer ones. Remember: Just as a car with 50,000 miles drives much differently than a new car, an older home lives much differently than a new one. Don’t forget to talk to the people living in the houses to find out what problems, if any, they’ve experienced with their homes. Don’t be afraid to knock on the doors of homes built by the contractor that weren’t on the reference list. Also, don’t forget to ask the contractor about their workmanship warranties. Warranties usually last for ten years, but they can vary. (See Chapter 17 for more on contractor warranties.)

       Compatibility: This one is the most important aspect to consider and yet the most difficult to identify. The hard part is first assessing who you are so you can pick the contractor who will work best with your style. For example, if you’re a micromanager who plans on being involved in every aspect of the project, you’ll constantly butt heads with a contractor who also likes to micromanage their projects. You need a more relaxed contractor willing to let you make the decisions or second-guess their work. On the other hand, if you don’t have the time to be involved in the management, someone with a relaxed attitude probably won’t give you the sense of security you need — particularly if they’re waiting for you to make decisions every day. Figure out what sort of experience will make you happiest, and find the contractor who can meet your needs.

References from people you know are great, but people have different tastes and perspectives on quality and experience. Ask specific, open-ended questions about the experience that can paint you a clear picture of the contractor’s personality. Just hearing that it was a good experience doesn’t