Biomass Valorization. Группа авторов

Scheme 2.2) [6,37]. In their own right, low‐molecular‐weight saccharides are valuable ingredients in the food manufactory and also used as substrates for the fermentative production of ethanol or LacA [38–40]. Polysaccharides are commonly hydrolyzed in aqueous mineral acids in industrial processes [41]. Most technologies are based on thermal hydrolysis of cellulosic biomass in dilute aqueous sulfuric acid solution in batch or percolation reactors, with a typical glucose yield of 55–70% [41]. The glucose yield may be improved to 85%, when conducting the hydrolytic processing of biomass in a countercurrent shrinking bed reactor system at elevated temperatures (up to 225 °C) [42]. This technology has been engineered at National Renewable Energy Laboratory (NREL) by designing a cascade of percolation reactors simulating countercurrent. The available information suggests that this specific process has been demonstrated to bench scale at present [42]. The sustainability of such methods at industrial scale may be compromised by the need for forcing processing parameters [40,43]. On the other hand, complexities arise because of the formation of large amounts of acidic wastewater and solid waste (typically, calcium sulfate after neutralization of sulfuric acid) and also because of the requirement for corrosion‐resistant manufacturing equipment [4,40]. These ongoing challenges have led to the exploration of new efficient methods for the hydrolytic processing of polysaccharides into low‐molecular‐weight derivatives, where high yields and selectivities, accompanied by low levels of waste production, are key parameters.

Solid acid‐catalyzed reactions of polysaccharides in aqueous media have drawn particular interest [40]. The use of solid catalysts is attractive because of the ease of their recovery and sometimes recyclability. An interesting strategy has been devised using a cellulase mimetic catalyst [44], containing both cellulose binding and cellulose hydrolyzing sites, similar to cellulase enzymes. The catalyst is a sulfonated chloromethyl polystyrene resin (CP‐SO₃H) bearing chloride groups (–Cl) with which saccharides and sulfonic groups (–SO₃H) are coordinated to generate the Brønsted acidity requisite for the hydrolysis of the glycosidic linkages (Scheme 2.3) [44]. The catalyst CP‐SO₃H demonstrated impeccable activity during the processing of microcrystalline cellulose (MCC), or starch (a mixture of α(1 → 4) linearly linked glucose polymer amylose and branched α‐glucose polymer amylopectin), in high yields of glucose (up to 100%). CP‐SO₃H is significantly more efficient than a diluted solution of sulfuric acid under identical processing conditions, or many other reported solid acid catalysts, such as acidic resins, zeolites, carbonaceous acids, or functionalized silicas [44,45]. This success has spread the adoption of cellulase mimetic catalysts based on varied sulfonated chloroorganic materials [46]. Table 2.1 provides a summary of the outcomes of several acid‐catalyzed processes.

Scheme 2.3 Proposed structure and mechanism of catalytic action of the cellulase mimetic catalyst. Source: Based on Shuai and Pan [44].

The sustainability of solid acids is somewhat undermined by the insolubility of both the cellulose and the catalyst, the latter by design, in aqueous reaction mixtures [4,40]. The heterogeneity of the system limits the number of effective substrate–catalyst interactions during the processing, leading to several technical and economical hurdles. Firstly, there is a need for high loadings of the catalyst [4,44–46]. This may lead to the production of solid deactivated catalyst waste, if it is not fully recyclable. Another downside relates to the use of pretreated cellulose, instead of largely available lignocellulosic biomass. Pretreatment helps to ameliorate issues pertaining to mass transfer in heterogeneous systems, owing to the reduced physical size and sometimes lower molecular weight of pretreated polysaccharides. Examples of pretreated substrates are MCC, a medium value product obtained by the treatment of wood pulp in diluted aqueous acids, and ball‐milled cellulose [16,58]. Ball milling is arguably the most commonly used method for the pretreatment of cellulosic biomass. Although this approach is efficient at the bench scale and quite effectively depolymerizes cellulose to some extent, it becomes highly energy demanding at the larger scale and remains mostly unemployed in the industry [4]. Some studies, however, claim that some of the significant energy implications associated with this method of pretreatment may be avoided for acid‐assisted mechanochemical depolymerization [47,59]. For instance, mechanochemical depolymerization of beechwood and poplar wood may be realized at kilogram scale by ball milling of biomass in the presence of sulfuric acid [47]. Nevertheless, these processes require subsequent dilution of the pretreated acidified systems with water and hydrolytic treatment under forcing reaction conditions, which does not significantly differ from other processes in aqueous solvents (Table 2.1). Considering the energy costs accompanied by a need for corrosion‐resistant equipment, such means of depolymerization cannot be accepted as sustainable, unless the energy demands of ball milling can somehow be reduced.

Table 2.1 Conditions and results of the acid‐catalyzed processing of cellulosic biomass into carbohydrates and furansa.

Substrate	Reaction media	Catalyst	T (°C)	t (h)	Yield glucans (%)	Yield glucose (%)	Yield xylose (%)	Yield HMF (%)	Yield FF (%)	References