List of Tables
1 Chapter 1Table 1.1 Welding and joining processes, type of energy used, and their abbrevia...Table 1.2 Arc efficiency by welding process.Table 1.3 Shows the arc efficiency factors for various commonly used arc welding...Table 1.4 Indicates general limits of joining/welding processes that apply to th...Table 1.5 Arc efficiency factor.
2 Chapter 2Table 2.8.3.1 Welding lead and their capacity.Table 2.9.1 Welding lens shades.Table 2.9.2 Helmets with auto adjusting lenses.Table 2.10.1 Electrode classification and A-numbers.Table 2.10.2 Shielded arc welding electrodes.Table 2.11.10 Common SMAW process anomalies and their suggested causes and corre...Table 2.11.12 Weld defects and suggested changes that can correct them.Table 2.12.1 Aluminum alloy designation system.Table 2.12.5 Cast aluminum designation and numbering system.Table 2.12.6 Temper designation letters and meaning.Table 2.12.23 Stainless steel welding electrodes and heat treatments.Table 2.13 Nominal compositions of some of duplex steels.Table 2.13.1 Nominal mechanical properties of duplex stainless steels.
3 Chapter 3Table 3.10.1 Basic matching guide for electrode size and nozzle.Table 3.11.1 Tungsten electrode tips.Table 3.11.2 Tungsten electrode tips.Table 3.11.3 Types of Tungsten electrode and their identification.Table 3.16.1 Welding cable current carrying capacity.Table 3.17.1 Details the NEMA rating and corresponding current output capacity.Table 3.21.1 Aluminum alloy designation system.Table 3.22.1 Cast aluminum designation and numbering system.Table 3.24.1 Aluminum welding procedures using AC high frequency stabilized arc.Table 3.24.2 GTAW stainless steel welding procedures.Table 3.25.1 Nominal compositions of some of duplex steels.Table 3.25.8 Stainless steel welding wire rod and heat treatments.Table 3.26.2 Nominal mechanical properties of duplex stainless steels.Table 3.29.1 Advantages and limitations of PAW process.
4 Chapter 4Table 4.4.1 Deposition rate of various GMAW metal transfer mode.Table 4.4.1.1 WPS for carbon steel and low alloy steels with short circuit trans...Table 4.4.1.2 Aluminum WPS for short circuit.Table 4.4.1.3 The transition current for spray transfer currents.Table 4.4.1.4.1 Carbon steel - Basic training WPS for spray transfer welding.Table 4.4.1.4.2 Aluminum - Basic training WPS for spray transfer welding.Table 4.5.1 Details the current and the shielding gas type used in spray transfe...Table 4.5.5.1 Gas selection guide.Table 4.12.1.4 Welding lead current carrying capacity.
5 Chapter 5Table 5.5.1 Carbon steel electrodes their use descriptions.Table 5.6.6.1 Impact of shielding gases on the mechanical properties of weld met...
6 Chapter 6Table 6.10.7 Indicates the basicity of various fluxes.Table 6.11 Common welding electrodes for SAW process.
7 Chapter 7Table 7.1 Pipe schedule.Table 7.2 Terms and abbreviations relating to welding and construction.Table 7.3 F-Number, ASME specification and AWS classification.Table 7.4 P-number, group number, and type of material.Table 7.5 Qualification of metals based on the procedure qualification.Table 7.6 Temperature conversion.Table 7.7 Temperature and pressure.
Guide
1 Cover
7 Foreword
8 Preface
10 Index
Pages
1 v
2 ii
3 iii
4 iv
5 xvii
6 xviii
7 xix
8 xx
9 xxi
10 xxii
11 xxiii
12 xxv
13 xxvi
14 xxvii
15 xxix
16 xxxi
17 xxxii
18 1
19 2
20 3
21 4