worldwide, led by Spain and the United States. In addition, a good number of commercial CSP plants are under construction or in the project state hinting towards a development of the renewable energy sector in the future.
The integration of TES into CSP plants is one of the major design changes that results in significant benefits including uninterrupted electricity production even during a day without the sun radiation or nighttime. Such systems will make the CSP plant more sustainable as well as more economically competitive and dispatchable. Even though a good number of CSP plants have been using TES, fast progress is needed in the TES technologies. As observed from the current state of the art, a large number of CSP plants implement sensible thermal energy storage systems. This is due to the reliability, low cost and large data owing to sensible energy storage. However, based on the disadvantages like low energy storage density, new ways like latent and thermochemical energy storage systems may be considered for future CSP plants. Latent and thermochemical energy storage systems have larger energy storage density which might lead to a bright future for CSPTES technology. However, more research efforts are needed to overcome the disadvantages of latent and thermochemical energy storage systems.
References
Adinberg, R., Simulation analysis of thermal storage for concentrating solar power. Applied Thermal Engineering, 31, 3588, 2011.
Affandi, R., Gan, C.K., Ghani, A., Ruddin, M., Performance comparison for parabolic dish concentrating solar power in high level DNI locations with George Town, Malaysia, Appl Mech Mater, 570, 2015.
Agyenim, F., Hewitt, N., Eames, P., A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS), Renew. Sustain. Energy Rev, 14, 615, 2010.
Ahmed, R., Sreeram, V., Mishra, Y., Arif, M.D., A review and evaluation of the state-of-the-art in PV solar power forecasting: Techniques and optimization, Renewable and Sustainable Energy Reviews, 124, 109792, 2020.
Avila-Marin, A.L., Volumetric receivers in solar thermal power plants with central receiver system technology: a review. Sol Energy, 85, 891, 2011.
Barlev, D., Vidu, R., Stroeve, P., Innovation in concentrated solar power. Sol Energy Mater Sol Cells, 95, 2703, 2011.
Bayón, R., Rojas, E., Analytical function describing the behaviour of a thermocline storage tank: a requirement for annual simulations of solar thermal power plants, International Journal of Heat and Mass Transfer, 68, 641, 2014.
Behar, O., Khellaf, A., Mohammedi, K., A review of studies on central receiver solar thermal power plants. Renew Sustain Energy Rev, 23, 12, 2013.
Biencinto, M., Bayón, R., Rojas, E., González, L., Simulation and assessment of operation strategies for solar thermal power plants with a thermocline storage tank. Sol Energy, 103, 456, 2014.
Cárdenas, B., León, N., High temperature latent heat thermal energy storage: phase change materials, design considerations and performance enhancement techniques, Renew. Sustain. Energy Rev, 27, 724, 2013.
Cavallaro, F.. Multi-criteria decision aid to assess concentrated solar thermal technologies. Renewable Energy, 34, 1678, 2009.
Desai, N.B., Bandyopadhyay, S., Integration of parabolic trough and linear Fresnel collectors for optimum design of concentrating solar thermal power plant. Clean Technol Environ Policy, 17, 1945, 2015.
Desai, N.B., Kedare, S.B., Bandyopadhyay, S., Optimization of design radiation for concentrating solar thermal power plants without storage. Sol Energy, 107, 98, 2014.
Guo, J., Huai, X., Cheng, K., The comparative analysis on thermal storage systems for solar power with direct steam generation. Renew Energy, 115, 217, 2018.
Herrmann, U., Kearney, D.W., Survey of thermal energy storage for parabolic trough power plants. ASME J Sol Energy Eng, 124, 145, 2002.
Herrmann, U., Kelly, B., Price, H., Two-tank molten salt storage for parabolic trough solar power plants. Energy, 29, 883, 2004.
Ho, C.K., Iverson, B.D., Review of high-temperature central receiver designs for concentrating solar power. Renew Sustain Energy Rev, 29, 835, 2014.
Islam, M.T., Huda, N., Abdullah, A.B., Saidur. R., A comprehensive review of state-of-the-art concentrating solar power (CSP) technologies: Current status and research trends. Renewable and Sustainable Energy Reviews, 91, 987, 2018.
Jain, A.A., Rabi, B.J., Darly, S.S., Application of QOCGWO-RFA for maximum power point tracking (MPPT) and power flow management of solar PV generation system, International Journal of Hydrogen Energy, 45, 4122, 2020.
John, E., Hale, M., Selvam, P., Concrete as a thermal energy storage medium for thermocline solar energy storage systems, Sol Energy, 96, 194, 2013.
Kelly, B., Kearney, D., Thermal storage commercial plant design study for a 2-tank indirect molten salt system. National Renewable Energy Laboratory, 2004.
Khare, S., Dell’Amico, M., Knight, C., McGarry, S., Selection of materials for high temperature sensible energy storage, Sol Energy Mater. Sol. Cells, 115, 114, 2013.
Khajepour, S., Ameri, S., Techno-economic analysis of a hybrid solar Thermal-PV power plant, Sustainable Energy Technologies and Assessments, 42, 2020, 100857.
Kolb, G.J., Evaluation of annual performance of 2-tank and thermocline thermal storage systems for trough plants. Journal of Solar Energy Engineering, 133, 031023, 2011.
Liu, M., Belusko, M., Steven, T.N.H., Bruno, F., Impact of the heat transfer fluid in a flat plate phase change thermal storage unit for concentrated solar tower plants. Sol Energy, 101, 220, 2014.
Liu, M., Steven, T.N.H., Bell, S., Belusko, M., Jacob, R., Will, G., Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies. Renew Sustain Energy Rev, 53, 1411, 2016.
Llorente, G.I., Ãlvarez, J.L., Blanco, D., Performance model for parabolic trough solar thermal power plants with thermal storage: comparison to operating plant data. Solar Energy, 85, 2443, 2011.
Lucentini, D.M., Thermal storage of sensible heat using concrete modules in solar power plants. Sol Energy, 103, 303, 2014.
Mehling, H., Cabeza, L.F., (2008) Heat and Cold Storage with PCM: An Up to Date Introduction into Basics and Applications. Heidelberg, Berlin: Springer.
Mills, D.R., Morrison, G.L., Compact linear Fresnel reflector solar thermal power-plants. Sol Energy, 68, 263, 2000.
Morin, G., Dersch, J., Platzer, W., Eck, M., Häberle, A., Comparison of linear Fresnel and parabolic trough collector power plants. Sol Energy, 86, 1, 2012.
Muhammad, H.R., Arshad, S.G.N., Complementing hydroelectric power with floating solar PV for daytime peak electricity demand, Renewable Energy, 162, 1227, 2020.
National Renewable Energy Laboratory (NREL) Project Listing. http://www.nrel.gov/csp/solarpaces/ (visited September 19th, 2020).
Navarro, M.E., Martinez, M., Gil, A., Fernandez, A.I., Cabeza, L.F., Olives, R. and Py X. Selection and characterization of recycled materials for sensible thermal energy storage, Solar Energy Materials and Solar Cells, 107, 131, 2012.
Poullikkas, A., Kourtis, G., Hadjipaschalis, I., Parametric analysis for the installation of solar dish technologies in Mediterranean regions. Renew Sustain Energy Rev, 14, 2772, 2010.
Powell, K.M., Edgar, T.F., Modeling and control of a solar thermal power plant with thermal energy storage. Chemical Engineering Science, 71, 138, 2012.
Prasad, L., Muthukumar, P., Design and optimization of lab-scale sensible heat storage prototype for solar thermal power plant application. Sol. Energy,